Drawing Compound

Approx. Rs 230 / LitreGet Latest Price

Product BrochureProduct Details:

FEATURES :

• DRAWLUBE 4 is a specially developed wire drawing compound for the manufacturers of copper and enameled wires.
• It is anon-staining, water soluble cream coloured paste for dry on or emulsion application.
• It is manufactured with specially balanced mixture of soap, fat and mineral oils.
• It is suitable for use as an effective coolant in wire drawing operations.
• The recommended dilution ratio with water is 1 to 5 % depending upon the the gauge of wire to be drawn.
• This product is also found suitable in deep drawing of automotive bodies and metal sheets.

SALIENT FEATURES :

• This wire drawing compound (paste) has been manufactured on the base of sodium stearate, semi synthetic E.P. additives for fine wire drawing of M.S. wires, Copper wires, Brass wires, G.I. wires etc. at medium / high speed.
• It is also suitable for single die pass.
• It gives bright finish on drawn wires.
• Packing: 180 Kg M.S.Drums.

Approx. Rs 200 / LitreGet Latest Price

Product BrochureProduct Details:

• HI-FORM 45 is a chlorinated viscous paste, specially formulated for drawing stainless steel & enameled wires.
• The chlorine incorporated confers EP properties and is highly stable even under high drawing speeds.
• It reacts with the surface to produce metallic derivatives to form low friction films and prevents wear and tear.

Approx. Rs 290 / LitreGet Latest Price

Product BrochureProduct Details:

FEATURES:

• HI-FORM 286 is medium viscosity product used for cold forming operations.
• It is blend of highly refined base stocks incorporated with performance enhancing additives like chlorinated products and sulphurised oils; for better finish of job and prevent wear and tear.

SALIENT FEATURES:

• HI-FORM 286 is used for forming operations where high EP properties are desired.
• HI-FORM 286 is recommended for use in neat form only. It is not recommended for use with copper and cupreous metals.

Approx. Rs 200 / LitreGet Latest Price

Product BrochureProduct Details:

• HI-FORM 81 is highly chlorinated extreme pressure oil blended with fatty additives which give it unique drawing properties for the most severe conditions.
• HI-FORM 81 to be used as supplied. It is important to avoid contamination with water either in storage or in use.
• HI-FORM 81 to be used for COLD PILGERING OF tubes in Stainless Steel and High Nickel Alloys, also for DEEP DRAWING operation in difficult steels, such as High Nickel/chromium Alloys, Nimonics, and Titanium. Also Suitable for aluminum Alloys.

WHEN USED FOR COLD PILFERING HI-FORM 81 GIVES:

• Maximum reduction per pass.
• High internal & external finish.
• Close limits on wall thickness.
• Low wear on mandrel & dies.
• Reduction in frictional heat.

WHEN USED FOR DEEP DRAWING, HI-FORM 81 GIVES:

• Freedom from scoring.
• Reduction of scrap.
• Ease of application.
• Ease of removal.
• Better surface finish.

Easily degreased in either Solvent Vapor of Alkaline Bath.

Product Price :Get Latest Price

Product BrochureProduct Details:

• HI DRAW 15 is a specially developed wire drawing lubricant for the manufacturers of aluminum wires.
• It is a Non-Staining, refined mineral oil incorporated with fatty material to improve wetting characteristics.
• It is manufactured with specially balanced mixture of fat and mineral oils.
• It is suitable for use as an effective coolant in aluminum wire Drawing operations.